SPORTident

Special Instruction Chips for various purposes

This start clock made by Emit (a SPORTident subsidiary) is innovative through its large LCD display, which means low power and readability in brightest conditions and also at night through backlighting. Its (non-removable) rechargeable battery means the clock can work for up to 36 hours. It comes with a tripod and a carrying case. It has been designed to work in a wide range of temperatures, down to -30 degrees.

Replacement / spare strap for all SPORTident finger stick timing chips. The regular length straps is for normal use on a finger. The long strap is for use around a wrist - typically for ski-O and especially with a SIAC touchless timing chip for ski orienteering.

This coupling stick is needed to enable communication between a USB or RS232 main station and a control. Insert the coupler into the hole of the main station and lay the control on top of the main station. The control will send the RF signal from the one control to the other.

The older, larger BS7s and the smaller, newer BS8s and BS9s each have two options for mounting holders. One is the bracket - a piece that runs lengthwise, with the control snapping into place. The other is the plate - a piece the size of the base of the control, into which the control snaps.

This instruction finger stick can only be used on BS7-P Printout Controls, and will cause accumulated results to be printed out.

This Instruction Finger Stick -- which only works with BS7-P Printer Controls -- is used to signal when a mass start occurs.

This finger stick is used to set controls into Service mode, or explicitly turn them off. It will work with BSF7, BSF8 and BSF9 controls.

This instruction stick will clear the backup memory when used on any control. It will work with older controls as well as current BSF7, BSF8 and BSF9 controls.

This card works identical to the classic Service/Off finger stick, but in a convenient credit-card sized format. It is used to set a control into Service mode, or explicitly turn it off. It will work with BSF7, BSF8 and BSF9 controls.

The pCard timing chip is ideal for groups and events where the number of controls is always small. pCards are suitable for school orienteering and for Enduro races. pCards come with a wrist safety strap. They hold a maximum of 20 controls, including any errors or duplicate punches so we recommend only using for events with 15 or fewer controls.

This cable connects the BS7-P printer control with the red SPORTident printer.

The SI-8 can hold times of up to 30 regular controls, in addition to the Start and Finish times.  It is suitable for recreational orienteers and many age group competitors in forest events.  It is also the lowest priced SI finger stick available.

Please note that due to the need for a unique name associated with each timing chip, you will only be able to choose a quantity of 1 for this product. If you would like to order multiple timing chips, please add the first to your cart, and then enter the name for the next chip before adding another to your cart.

The SI-8 can hold times of up to 30 regular controls, in addition to the Start and Finish times. It is suitable for recreational orienteers and many age group competitors in forest events. It is also the lowest priced SI finger stick available.

All SPORTident finger stick timing chips come with a finger strap. We highly recommend adding a wrist safety strap as well to prevent loss of your timing chips. See related items below to order bulk safety straps.

This is the standard SPORTident transport case that also comes with the school kits. It can hold up to 22 BSF7s or 54 BSF8s.