This coupling stick is needed to enable communication between a USB or RS232 main station and a control. Insert the coupler into the hole of the main station and lay the control on top of the main station. The control will send the RF signal from the one control to the other.
The older, larger BS7s and the smaller, newer BS8s and BS9s each have two options for mounting holders. One is the bracket - a piece that runs lengthwise, with the control snapping into place. The other is the plate - a piece the size of the base of the control, into which the control snaps.
These waterproof, vinyl stickers were specifically designed for SPORTident controls and can also be adapted for a multitude of other uses. The O-Store can provide custom sized stickers with custom text, logos, and design.
This device is useful to determine the signal strength at a given distance. It is used like a SIAC finger stick, but indicates the signal strength by the number of beeps it emits when within range - a good signal emits 3 beeps at a time, an average signal 2 beeps, and a weak signal is 1 beep.
These 8.5x11" sheets (36 stickers per sheet) are perfect for printing your own temporary stickers for SPORTident BSF9, BSF8 (display bottom) and BSF7 controls.
Features of these stickers include: - Waterproof - Easy to remove - Print doesn't scratch off easily - Works with laser printer - Ideal for temporary re-labelling of controls - Print on them yourselves, or request that we print for you.